I-SC-Type Copper Terminal (Itheminali Yembobo Yokuhlola)

I-SC-Type Copper Terminal(eyaziwa nangokuthi I-Inspection Port Terminal noma i-SC-Type Cable Lug) yisixhumi sekhebula esinefasitela lokubuka, esisetshenziselwa ngokuyinhloko ukuxhumana kwetheminali phakathi kwezintambo nezinto zikagesi. Ngezansi amaphuzu ayo abalulekile olwazi kanye nezincomo zokukhetha/uhlelo lokusebenza:

.1. Isakhiwo kanye nezici.

.Inspection Port Design.
Itheminali inewindi lokubuka (“imbobo yokuhlola”) eseceleni, evumela ukuqinisekiswa okubonakalayo kokujula kokufakwa kwentambo nokuma ngesikhathi sokucwiliswa. Lokhu kunciphisa iphutha lomuntu futhi kuthuthukisa ukuvumelana kokufakwa nokuthembeka.

.Izinto kanye Nenqubo.

• Kwenziwe **I-T2-grade copper (≥99.9% okuqukethwe kwethusi)**​ ukuze kusebenze kahle kakhulu.
• Indawo efakwe ngothayela ukuvimbela ukugqwala kwe-oxidation kanye nokugqwala kwe-electrochemical, inwebe impilo yesevisi.

.

Ukusebenza Komshini.
Kufakwe kusetshenziswa ama-hydraulic crimpers noma amathuluzi akhethekile. Ihlinzeka ngoxhumano oluvikelekile, olungazweli ukudlidliza ngemva kokuklebhuka. Izinga lokushisa elisebenzayo: -55°C kuya +150°C.

.2. Imininingwane namamodeli.

.Ingqungquthela Yokuqanjwa Kwemodeli.
Amamodeli ngokuvamile alebulwe ngokuthi “SCInombolo-Inombolo,”isb:

• .I-SC10-8: Ku-10mm² wire cross-section, isikulufu sembobo ububanzi 8mm.
• .I-SC240-12: Ngocingo elingu-240mm², ububanzi bembobo yesikulufa ngu-12mm.

.Ibanga Lokumboza.
Isekela i-wire cross-sections kusuka ku-1.5mm² ukuya ku-630mm², iyahambisana nobubanzi bembobo eyisikulufa ehlukahlukene (isb., 6mm, 8mm, 10mm).

.3. Izicelo.

• .Izimboni: Imishini, amakhabethe/amabhokisi okusabalalisa amandla, imishini, ukwakha umkhumbi, izitimela, njll.
• .Izimo: Ukuxhumana kukagesi okunembayo okuphezulu, izindawo zokulungisa njalo (isb., amasistimu okusabalalisa amandla).

.4. Imihlahlandlela yokukhetha kanye nokufaka.

.Match Wire Cross-Section.
Khetha imodeli ngokususelwe esigabeni esiphambanayo sekhebula (isb, i-SC25 yezintambo ezingu-25mm²).

.Ukuhambisana Kwe-Screw Hole.
Qinisekisa ukuthi isikulufu sembobo yetheminali ifana nedivayisi exhunyiwe noma i-copper busbar ukuze ugweme ukuthintana okungalungile.

.Amathiphu okufaka.

• Sebenzisa ama-hydraulic crimpers ukuze uthole ukuxhumana okuqinile phakathiIsikhumulokanye nocingo.
• Qinisekisa ukufakwa kwentambo egcwele ngembobo yokuhlola ukuze uvimbele ukuxhuma okuxekethile.

.Ukuqhathanisa Nezinye Izinhlobo.

.Itheminali evulekile yokuphela (i-OT-Type):

• .Izinzuzo: Ukunemba okuphezulu kokufaka ngembobo yokuhlola, kunciphisa amanani okusebenza kabusha.
• .Ukubi: Ukusebenza kokuvala okuphansi kancane uma kuqhathaniswa namatheminali avimba uwoyela (i-DT-Type), ayilungele izindawo ezivalwe ngokugcwele.