Imodeli ye-OT Copper Open Terminal

1. Amapharamitha Abalulekile Ekuqanjweni Kwemodeli

Amamodeli weI-OT CopperVula Itheminaliahlukaniswa ngokuyinhloko ngamapharamitha alandelayo:

I-Conductor Cross-Section Area(I-Core Differentiator)

• Izibonelo Zezibonelo: OT-CU-0.5 (0.5mm²), OT-CU-6 (6mm²), OT-CU-10 (10mm²)
• Qaphela: Izinombolo ezinkulu zibonisa umthamo wamanje wokuthwala ophezulu. Ezinye izinhlobo zisebenzisa amakhodi ezinhlamvu (isb, A=0.5mm², B=1mm²); bheka amakhathalogi ukuze uthole amamephu aqondile.

Ikalwe okwamanje kanye ne-Voltage

• Izibonelo Zezibonelo: OT-CU-10-250AC (10A/250V AC), OT-CU-30-660VDC (30A/660V DC)
• Qaphela: Iziqalo/izijobelelo zichaza izinhlobo zamandla kagesi (AC/DC) nezilinganiso.

Uhlobo Lokuxhumana

• I-Spring Clamp: OT-CLAMP-CU-6 (isb, OT-CLAMP-CU-6)
• Isikulufa Terminal: OT-SREW-CU-10 (isb, OT-SREW-CU-10)
• Plug-and-Pull Interface: OT-PLUG-CU-4 (isb, OT-PLUG-CU-4)

(Ongakukhetha)

• I-IP-Vikelwe: OT-IP67-CU-6 (uthuli/ukuvikela amanzi ezindaweni ezinokhahlo)
• Okujwayelekile: OT-STANDARD-CU-10

2. Indlela Yokuhlukanisa Amamodeli

Khomba I-Conductor Cross-Section

• Funda inani lezinombolo ngokuqondile (isb, OT-CU-6 = 6mm²) noma sebenzisa amathebula ekhodi athile omkhiqizo.

Nquma Indlela Yokuxhuma

• I-Spring Clamp: Bheka i-CLAMP noma iSpring egameni lemodeli (isb,Spring Clamp Terminal).
• IsikulufuIsikhumulo:Bheka i-SREW noma i-Screw (isb.Isikulufa Terminal).
• Xhuma futhi Udonse: Sesha i-PLUG noma i-Plug-and-Pull (isb.Plug-and-Pull Terminal).

Hlola

• Amamodeli ane-IP (isb, IP67) akhombisa ukumelana nothuli/amanzi; amamodeli ajwayelekile awanaso lesi sijobelelo.

Izimpawu zezinto/zenqubo

• I-Tin/Nickel Plating: Ngokuvamile imakwa ngokuthi SN (isb, OT-CU-6-SN).
• Ukumelana ne-Oxidation: Amamodeli asezingeni eliphezulu angacacisaUkumelana ne-Oxidation.

3.Ukuqhathaniswa Kwemodeli Yomkhiqizo Okuvamile

4.Imihlahlandlela yokukhetha

Khetha Ngokusekelwe Kumthwalo

• Imithwalo Elula(imigqa yesignali): 0.5–2.5mm²
• Imithwalo Enzima(amakhebuli kagesi): 6–10mm²

Qondanisa Izimo Zemvelo

• Izindawo Ezomile: Amamodeli ajwayelekile
• Indawo eswakeme/Edlidlizayo: Izikulufo ezivikelwe nge-IP noma eziqinisiwe

Beka Eqhulwini Izidingo Zokuxhuma

• Imijikelezo evamisile yokuxhuma/yokukhipha: Sebenzisa izinhlobo ze-plug-and-donsa (isb, uchungechunge lwe-OT-PLUG).
• Ukufakwa unomphela: Khetha isikulufuamatheminali(isb, uchungechunge lwe-OT-SREW).

5. Amanothi Abalulekile

• Izimiso zokuqamba amamodeli ziyahlukahluka ngomkhiqizo; njalo ubhekisele kumakhathalogi womkhiqizi.
• Uma amapharamitha angamamodeli aqondile engatholakali, linganisa ubukhulu betheminali (isb, uchungechunge) noma thintana nabahlinzeki ukuze uqinisekise ukuhambisana.