IFomu ende Umdibaniso oMbindi Bare

1. IiParameters eziphambili kuMfanekiso othiya amagama

Iimodeli zeifom emide ephakathi engenanto izihlanganisizahlulwa ikakhulu ngezi parameters zilandelayo:

UmqhubiIndawo enqamlezileyo(umahluli ongundoqo)

• Imizekelo yemizekelo: LFMB-0.5 (0.5mm²), LFMB-2.5 (2.5mm²), LFMB-6 (6mm²)
• Phawula: Amanani amakhulu abonisa umthamo ophezulu wokuthwala okwangoku. Ezinye iibhrendi zisebenzisa iikhowudi ezinobumba (umz., A=0.5mm², B=1mm²); jonga kwiikhathalogu zemaphu ezichanekileyo.

Ilinganiswe ngoku kunye neVoltage

• Imizekelo yemizekelo: LFMC-10-250AC (10A/250V AC), LFMC-30-660VDC (30A/660V DC)
• Phawula: Izimaphambili/izimamva zibonisa iindidi zamandla ombane (AC/DC) kunye neereyithingi.

Uhlobo loQhagamshelwano

• I-Clamp yaseNtwasahlobo: LFMS-XX (umz., LFMS-4)
• Isikhululo seTheminali: LFSB-XX (umz., LFSB-6)
• Plug-and-Tsalo Interface: LFPL-XX (umzekelo, LFPL-10)

(Ngokhetho)

• IP-Ekhuselweyo: LFMP-IP67-XX (uthuli/ukungangeni kwamanzi kwiindawo ezirhabaxa)
• Umgangatho: LFMA-XX (ukugqunywa okusisiseko kuphela)

2. Indlela Yokwahlula Iimodeli

ChongaUmqhubiIndawo yokudlula

• Funda ixabiso lamanani ngokuthe ngqo (umzekelo, LFMB-6 = 6mm²) okanye sebenzisa iitheyibhile zekhowudi ezikhethekileyo.

Misela iNdlela yoQhagamshelwano

• I-Clamp yaseNtwasahlobo: Jonga i-S okanye i-CLAMP kwigama lomfuziselo (umz.,Itheminali yeClamp yaseNtwasahlobo).
• Isikhululo seTheminali: Khangela i-B okanye i-SREW (umzekelo,Isikhululo seTheminali).
• Iplagi-kunye-Tsalo: Khangela i-P okanye i-PLUG (umzekelo,Plug-and-Tsalo Terminal).

Khangela

• Iimodeli ezine-IP (umzekelo, i-IP67) zibonisa ukuxhathisa uthuli / amanzi; imifuziselo esemgangathweni ayinasimamva.

Izinto eziphathekayo/iNkqubo yokuMakisha

• I-Tin/Nickel Plating: Iphawulwa rhoqo SN (umz., LFMB-6-SN).
• Ukumelana ne-Oxidation: Iimodeli ezikumgangatho ophezulu zingachazaUkumelana ne-Oxidation.

3. Uthelekiso lweMfuziselo yeBrand eqhelekileyo

4. Izikhokelo zokuKhetha

Khetha Ngokusekwe kuMthwalo

• Imithwalo elula(imigca yemiqondiso): 0.5–2.5mm²
• Imithwalo Enzima(iintambo zombane): 6–10mm²

Tshatisa IiMeko zokusiNgqongileyo

• Imekobume ezomileyo: Iimodeli eziqhelekileyo
• Ubume beNdawo obufumileyo/Ebungcangcazelayo: IP-ekhuselweyo okanye eyomeleziweyo yesikrufu iitheminali

Beka izinto ezibalulekileyo kwindawo yokuqalaUqhagamshelwanoIimfuno

• Imijikelo yeplagi/yokukhupha rhoqo: Sebenzisa iintlobo zeplagi kunye nokutsala (umzekelo, uthotho lweLFPL).
• Ufakelo olusisigxina: Khetha izikrufu iitheminali (umzekelo, uthotho lweLFSB).

5. Amanqaku abalulekileyo

• Iimodeli zokuthiywa kwemodeli ziyahluka ngokwegama; soloko ubhekisa kwiikhathalogu zabavelisi.
• Ukuba iiparamitha zemodeli ezichanekileyo azifumaneki, linganisa imilinganiselo yetheminali (umzekelo, umsonto) okanye qhagamshelana nababoneleli ngesiqinisekiso sokuhambelana.