Mohlala oa OT Copper Open Terminal

1. Li-Parameters tsa Bohlokoa ho Ho reha Mehlala ea Mohlala

Mehlala eaOT KoporoBula Terminalli khetholloa haholo-holo ka li-parameter tse latelang:

Conductor Cross-Section Area(Core Differentiator)

• Mehlala ea MehlalaOT-CU-0.5 (0.5mm²), OT-CU-6 (6mm²), OT-CU-10 (10mm²)
• Hlokomela: Linomoro tse khōloanyane li bontša matla a holimo a ho tsamaisa hona joale. Mefuta e meng e sebelisa likhoutu tsa litlhaku (mohlala, A=0.5mm², B=1mm²); sheba li-catalogs bakeng sa limmapa tse nepahetseng.

E lekantsoe Hona Joale le Voltage

• Mehlala ea Mehlala: OT-CU-10-250AC (10A/250V AC), OT-CU-30-660VDC (30A/660V DC)
• Hlokomela: Li-prefixes / li-suffixes li bolela mefuta ea motlakase (AC/DC) le litekanyetso.

Mofuta oa Khokahano

• Sekoahelo sa Selemo: OT-CLAMP-CU-6 (mohlala, OT-CLAMP-CU-6)
• Screw Terminal: OT-SREW-CU-10 (mohlala, OT-SREW-CU-10)
• Plug-and-Hull Interface: OT-PLUG-CU-4 (mohlala, OT-PLUG-CU-4)

(Ha ho boikhethelo)

• IP-E sirelelitsoeOT-IP67-CU-6 (lerōle/e thibelang metsi bakeng sa tikoloho e thata)
• Standard: OT-STANDARD-CU-10

2. Mokhoa oa ho Khetholla Mehlala

Khetholla Conductor Cross-Section

• Bala boleng ba linomoro ka ho toba (mohlala, OT-CU-6 = 6mm²) kapa sebelisa litafole tsa likhoutu tse khethehileng.

Etsa qeto ea mokhoa oa ho hokahanya

• Sekoahelo sa Selemo: Batla CLAMP kapa Spring ka lebitso la mohlala (mohlala,Seteishene sa Clamp ea Selemo).
• ScrewTheminale:Sheba SREW kapa Screw (mohlala,Screw Terminal).
• Tlanya-le-Hula: Batla PLUG kapa Plug-and-Pull (mohlala,Plug-and-Hull Terminal).

Hlahloba

• Mehlala e nang le IP (mohlala, IP67) e bontša ho hanyetsa lerōle / metsi; mefuta e tloaelehileng ha e na sehlohloloana sena.

Material/Matshwao a Tshebetso

• Tin/Nickel Plating: Hangata e tšoauoa SN (mohlala, OT-CU-6-SN).
• Khanyetsano ea Oxidation: Mefuta ea maemo a holimo e ka hlakisaE hanyetsanang le Oxidation.

3.Papiso e Tloaelehileng ea Brand Model

4.Litaelo tsa Khetho

Khetha E Thehiloe ho Mojaro

• Meroalo e Bobebe(mehala ea matšoao): 0.5–2.5mm²
• Meroalo e Boima(lithapo tsa motlakase): 6–10mm²

Kopanya Maemo a Tikoloho

• Libaka tse omileng: Mefuta e tloaelehileng
• Libaka tse mongobo/tse sisinyehang: Li-screw terminals tse sirelelitsoeng ka IP kapa tse matlafalitsoeng

Beha Pele Litlhoko tsa Khokahano

• Li-cycle tse etsahalang khafetsa: Sebelisa mefuta ea li-plug-and-pull (mohlala, letoto la OT-PLUG).
• Lits'ebetso tsa ka ho sa feleng: Khetha ho sebelisa screwliteishene(mohlala, letoto la OT-SREW).

5. Lintlha Tse Bohlokoa

• Litloaelo tsa mabitso a mohlala li fapana ho ea ka mofuta; kamehla sheba li-catalogs tsa moetsi.
• Haeba li-parameter tse nepahetseng tsa mohlala li le sieo, lekanya boholo ba litheminale (mohlala, khoele) kapa ikopanye le barekisi ba thepa bakeng sa netefatso.