1.Classified by Conductor Cross-Section (Common Specifications)
| Conductor Cross-Section (mm²) | Inoshanda Cable Diameter (mm) | Recommended Applications |
| 0.5–1.5 | 0.28–1.0 | Zvigadzirwa zveMicroelectronic, sensors |
| 2.5–6 | 0.64–1.78 | Midziyo yemumba, mabhokisi madiki ekugovera |
| 10–16 | 2.0–4.14 | Industrial midziyo, injini wiring |
| 25–35 | 4.0–5.06 | High-simba kugovera, transformer connections |
2.Classified by Interface Type
| Terminal Type | Technical Features | Typical Applications |
| Screw Terminal | Threaded terminals inoda kusimbiswa | Mamiriro akavimbika epamusoro (semuenzaniso, makabati emagetsi) |
| Plug-in Type | Kuisa zvakananga pasina zvishandiso | Kugadzirisa nekukurumidza (semuenzaniso, PLC wiring) |
| Multi-Pin Terminal | Inotsigira parallel yekubatanidza waya dzakawanda | Complex waya harnesses |
3. Yakarongwa ne
| Muenzaniso Suffix | Dziviriro Features | Nzvimbo Dzinoshanda |
| -IP20 | Dustproof isina sleeve yekudzivirira | Dry indoor environments (semuenzaniso, midziyo yemuhofisi) |
| -IP67 | Isaipinda mvura uye isingapindi guruva, inoshingirira kudzika kwemvura 1m | Nzvimbo dzakanyorova/kunze (semuenzaniso, ngarava) |
| -EX | Kuputika-uchapupu hwekugadzira | Nzvimbo dzine njodzi (semuenzaniso, migodhi yemarasha, petrochemical plants) |
Key Parameters yeSarudzo
1.Conductor Material
● Mhangura (Cu): High conductivity, yakanakira kushandiswa kwepamusoro-ikozvino (semuenzaniso, maitiro ekugovera simba).
● Aluminium (Al): Yakareruka uye inodhura-inoshanda, asi dzivisa kutarisana zvakananga nemhangura (shandisa zvigaro zvekushandura).
2.Crimping Zvinodiwa
● Chengetedza kuwirirana nemhangura yakasanganiswa / aluminium conductors kana multi-strand wire connections.
3.Environmental Adaptability
● Mamiriro ekunze ekupisa (>85°C): Sarudza zvinhu zvinodzivirira kupisa (eg, tin-plated copper).
● Mamiriro ezvinhu anozunguzika: Sarudzo materminal ane elasticity yakanaka (semuenzaniso, aruminiyamu alloys).
Yakajairika Brand uye Model References
| Brand | Muenzaniso Muenzaniso | Core Zvakanakira |
| Phoenix | CK 2.5–6 | Yakanyanya-chaiyo crimping, UL-yakasimbiswa |
| Molex | 10104–0001 | Plug-in dhizaini yePCB application |
| Weidmuller | WAGO 221 Series | Screw-type terminals yekusimba kwemaindasitiri |
Zvinokosha
1.Matching Principles
● Ita shuwa kuti nzvimbo yakachinjika ndeye ≥ iyo tambo chaiyo inotakura-inotakura simba (tarisa IEC 60364).
●Dzora tambo yedhayamita kutsauka mukati me ± 5% kuti udzivise crimps dzakasununguka.
2.Instalation Standards
● Ita muyedzo wekutemesa mushure mekuita crimping (yakajairika kukosha: 70% ~ 80% yekusimba kwemutyairi wesimba).
● Dzorera materminals kana kuti shandisa zvinodzivirira kana sleeve ye insulation yakanganiswa.
Nguva yekutumira: Kubvumbi-15-2025
